Plant Extract Supplier Audit Checklist: 12 Questions to Ask Before Your First PO

Choosing a plant extract supplier is rarely a price decision. A low offer that arrives with an ambiguous assay method, no raw-material traceability, or a certificate of analysis that cannot be reconciled with the batch creates cost later — in reformulation, rejected goods, or a delayed product launch. Use the checklist below as a repeatable qualification framework for botanical ingredient sourcing.

Key takeaways
  • Ask for the assay method, not just the number.
  • Trace the finished extract back to a raw-material lot and harvest window.
  • Verify that the COA is batch-specific and method-referenced.
  • Agree change-control and re-qualification rules before the first PO.

1. Raw material and origin

Start upstream. The active profile of a botanical extract is shaped by species, plant part, growing region, harvest window and post-harvest handling. A supplier who can only say “standardised extract” cannot help you investigate an out-of-spec result.

  • Botanical identity: Latin binomial, plant part, and the identification method used.
  • Origin: growing region or collection area, and whether the material is cultivated or wild-collected.
  • Seasonality: harvest window and how lot-to-lot variation is managed.
  • Traceability: a documented link from the finished batch number back to the incoming raw-material lot.

At Bera Bio, our raw-material base is in Hunan’s forest regions — see how we source — which is why origin documentation is the first section of every specification we issue.

2. Specification and assay method

“10:1” and “5% chlorogenic acid” describe different things. An extract ratio describes the concentration of raw material into finished extract; an assay describes a measured marker. Neither is complete without the analytical method.

Spec fieldWhat to require
Marker / activeNamed compound(s) and acceptance range, not a single target number
Assay methodHPLC, UHPLC, UV-Vis or GC, with column and detection wavelength where relevant
Reference standardSource and purity of the standard used for quantification
Loss on drying / moistureLimit and method, because it changes apparent potency
CarriersMaltodextrin, dextrin, silica or none — with percentage declared
Physical formMesh size, bulk density, appearance, solubility

3. Contaminants, residues and microbiology

Ask which limits are applied and against which framework. For food and supplement destinations, the usual panels are heavy metals (lead, cadmium, arsenic, mercury), pesticide residues, residual solvents, microbiological counts, mycotoxins and, where relevant, PAHs.

In the EU, contaminant limits are set under Regulation (EU) 2023/915 and pesticide residue limits under Regulation (EC) No 396/2005; in the US, dietary supplement manufacturers work under 21 CFR Part 111 and importers under FSMA FSVP. A supplier should be able to state which of these their release specification is written against.

4. Documentation quality

  • A batch-specific COA with methods, results, limits, date and authorised sign-off.
  • MSDS/SDS, specification sheet, allergen statement, and non-GMO / vegan declarations where claimed.
  • A sample retention policy and a defined shelf life with storage conditions.
  • Clear rules for re-issue or correction of documents.

5. Process, capacity and change control

Confirm extraction solvent, extraction temperature range, drying method and whether the same line handles allergens or animal-derived materials. Ask what changes trigger notification: a new raw-material source, a new drying subcontractor, a revised assay method or a packaging change. Put the notification window into the supply agreement.

6. Samples, scale-up and commercial terms

A 100 g laboratory sample can behave differently from a 500 kg production batch. Ask for a pilot or pre-shipment sample from the production lot, not only a retained lab sample, and agree how a failed pre-shipment sample is handled. Clarify MOQ, lead time, Incoterms, payment terms and who owns the specification if you commission a custom blend.

Frequently asked questions

How many batches should we qualify before a first production order?

For a new ingredient, three consecutive batches from different raw-material lots is a common, defensible minimum. It shows whether the assay and contaminant results are stable rather than a single good result.

Is a third-party COA necessary if the supplier tests in-house?

Not for every shipment, but an independent laboratory confirmation on the first batch and periodic verification thereafter is good practice, especially for high-value actives or markets with strict contaminant limits.

What is the most common red flag on a botanical extract COA?

A result with no method reference, or a “total polysaccharides” figure presented as if it were a beta-glucan assay. Always ask which method produced the number.

Can one specification cover both food and cosmetic grades?

Usually not. Cosmetic buyers add INCI, preservative, odour, colour and microbial requirements; food and supplement buyers add contaminant and labelling requirements. Ask for grade-specific sheets.

Need the documentation for your project?

Tell us the ingredient, target specification, quantity and destination market. Our team will send a specification sheet, COA sample and a quotation within 24 hours on working days.

Request a Quote Browse Products

Related topic: supplier qualification and documentation packages

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top