A tongkat ali specification should be built on an eurycomanone assay by HPLC and a documented Eurycoma longifolia root origin, not on an extract ratio. Ratios such as 100:1 or 200:1 describe how much raw material was concentrated into the extract; they say nothing about the marker content, the solvent used or whether the root was diluted with a carrier. Ask for the assay value, the method and the raw-material traceability together.
- Treat 100:1 and 200:1 as process descriptions, not potency specifications.
- Set an eurycomanone range by HPLC with a named reference standard.
- Verify the plant part and country of origin; root age and origin affect the marker profile.
- Screen for starch, dextrin and undeclared carriers that inflate apparent yield.
1. Why the ratio is not the specification
An extract ratio is a mass-balance statement: 200 kg of root processed into 1 kg of extract is described as 200:1. The same ratio can be produced from different raw material, different solvents and different drying conditions, giving a wide spread of marker content. Two suppliers can honourably quote 200:1 and deliver material that behaves differently in a formulation.
Worse, the ratio gives no protection against dilution. Adding maltodextrin or starch after extraction increases the powder mass without changing the declared ratio on the quotation. This is why a ratio-only RFQ almost always ends in a renegotiation after the first incoming-goods test.
- Ratio: describes concentration of input to output.
- Assay: describes a measured marker in the finished powder.
- Yield: describes process efficiency, which is the supplier’s concern, not the buyer’s.
2. Eurycomanone and the assay method
Eurycomanone is the quassinoid most often used as the analytical marker for Eurycoma longifolia root extract. A practical specification sets an acceptance range (for example a stated minimum with an upper bound), names HPLC or UHPLC, and identifies the reference standard and its purity. Without the standard, two laboratories can produce different numbers from the same sample.
Ask also whether the laboratory reports eurycomanone alone or a sum of quassinoids. The two figures are not interchangeable, and the method description should say which one is being quoted.
| Spec field | Defensible wording | Why it matters |
|---|---|---|
| Marker | Eurycomanone, with an acceptance range | A single target number leaves no room for normal batch variation |
| Method | HPLC / UHPLC, column, detection wavelength, standard source | Makes results reproducible between laboratories |
| Reference standard | Supplier, purity and lot of the standard | Without it, the percentage cannot be independently checked |
| Ratio | Recorded as process information only | Keeps the ratio out of the release decision |
3. Origin, plant part and sustainability documentation
Tongkat ali is sourced as a root, and root age, growing region and harvesting practice matter commercially as well as analytically. Material from different origins can carry different quassinoid profiles, and wild-harvested root raises traceability and supply-continuity questions that a buyer should resolve before committing to a 12-month programme.
Request the country and region of origin, a statement on cultivated versus wild-collected material, and the supplier’s position on harvest documentation for the destination market. At Bera Bio we treat origin documentation as the first section of every specification we issue for botanical ingredients.
- Eurycoma longifolia Jack, root, with botanical identification method.
- Country/region of origin and harvest or collection window.
- Cultivated or wild-collected, plus any CITES or export documentation where relevant.
- A documented link from the finished batch to the incoming raw-material lot.
4. Extraction solvent, carrier and physical behaviour
Water and hydroethanolic extraction are both traded. The solvent choice changes which compounds are carried into the extract, which residual-solvent limits apply, and how the powder behaves in a capsule or tablet blend. Spray-drying carriers should always be named and quantified.
Tongkat ali powders can be strongly bitter and hygroscopic. Bulk density, moisture and particle size are worth setting before scale-up, especially for high-speed encapsulation or stick-pack filling.
- Extraction solvent and solvent ratio; residual-solvent results where ethanol is used.
- Carrier identity and approximate percentage, or an explicit “no carrier” statement.
- Loss on drying, bulk density, mesh size and flow characteristics.
- Packaging format and whether a desiccant is required.
5. Adulteration, fillers and the contaminant panel
The two recurring problems with ratio-driven offers are undeclared carriers and the substitution of other plant material. A simple starch test, an ash value and an HPLC fingerprint against a retained reference sample will usually expose both. Build those checks into the first-batch qualification rather than relying on the visual appearance of the powder.
The contaminant panel should follow the same structure as for any botanical extract: heavy metals by ICP-MS, a multi-residue pesticide screen, residual solvents and microbiology, each with stated limits and method references.
| Check | What it detects | When to run it |
|---|---|---|
| HPLC fingerprint vs retained reference | Wrong species or unexpected marker profile | First batch and periodically thereafter |
| Starch / dextrin screen | Undeclared carrier used to increase powder mass | First batch, and when the ratio changes |
| Total ash and acid-insoluble ash | Inorganic dilution or soil contamination | Every batch where the specification sets a limit |
| Heavy metals and pesticides | Market-specific contaminant risk | Every released batch |
6. A complete RFQ template
When the RFQ names the specification fields up front, the quotation is comparable across suppliers and the first production batch is far more likely to pass incoming QA. Send the same list to every supplier and keep the returned sheets as the qualification record.
- Eurycoma longifolia root extract; eurycomanone acceptance range by HPLC with method and standard.
- Plant part, country/region of origin, harvest window and cultivated/wild statement.
- Solvent, carrier, physical parameters and packaging.
- Contaminant limits for the destination market, plus a batch-specific COA and a pre-shipment sample.
Frequently asked questions
Is 200:1 tongkat ali twice as strong as 100:1?
Not necessarily. The ratio describes how much root was concentrated into the extract, not how much eurycomanone the finished powder contains. Without an assay, the ratio cannot be used to compare two offers.
Which assay method should I require?
HPLC or UHPLC with a named eurycomanone reference standard, plus the column and detection wavelength. Ask whether the reported figure is eurycomanone alone or a sum of quassinoids.
How do I check for undeclared carriers?
Request the carrier identity and percentage in writing, then verify with a starch/dextrin screen, ash values and an HPLC fingerprint against a retained reference sample from the first qualification batch.
What origin documents should a supplier provide?
Botanical identity, plant part, country and region, cultivated or wild-collected status, harvest window, and a traceable link between the finished batch number and the incoming raw-material lot.
Need the documentation for your project?
Tell us the ingredient, target specification, quantity and destination market. Our team will send a specification sheet, COA sample and a quotation within 24 hours on working days.
Request a Quote Browse Products
Related topic: tongkat ali extract specifications and eurycomanone assay

