For purified shilajit extract, the fulvic acid figure is only meaningful when the quantification method is named, and the release decision should rest on a full contaminant panel rather than on that figure alone. Shilajit is a mineral-rich natural exudate, so heavy metals, ash content and authenticity checks are as important as the marker. Ask for the method, the source region, the purification process and an independent laboratory confirmation on the first batch.
- Fulvic acid percentages from different methods are not comparable; name the method.
- Require heavy metals by ICP-MS with individual limits, not a generic “complies”.
- Use ash, moisture and an HPLC or spectroscopic fingerprint to test authenticity.
- Obtain independent laboratory confirmation on the first production batch.
1. What shilajit is and why it needs tighter controls
Shilajit is a mineral-organic exudate collected from rock formations in high-altitude regions, then purified before use as an ingredient. Because the raw material is geological rather than a cultivated crop, its composition varies with the collection site, and it can carry elevated levels of naturally occurring metals. Purification is therefore a manufacturing step that belongs in the specification, not an optional extra.
For a buyer, the practical consequence is simple: one trade description can cover crude resin, a purified powder and a diluted powder on a carrier. These are different materials and must be specified separately.
2. Fulvic acid: read the method before the number
There is no single universally applied official method that makes every “% fulvic acid” claim equivalent. Some suppliers report a gravimetric or UV-based humic-substance total, others report a chromatographic fraction, and some express a combined humic plus fulvic figure. A 60% claim from one method can be lower than a 20% claim from another.
Ask the supplier to state what is being measured, which standard or reference is used, whether the figure is on an as-is or dry basis, and whether humic substances are included. Then hold that definition constant across all future batches.
| Claim on the offer | What to ask | Risk if left undefined |
|---|---|---|
| “Fulvic acid 60%” | Which method, as-is or dry basis, humic substances included? | Incoming assay disagrees with the COA |
| “Humic substances 80%” | Is fulvic acid reported separately? | A combined total is mistaken for a fulvic figure |
| “Purified shilajit” | Purification steps, filtration and carrier | Crude resin is quoted against a purified grade |
| “Standardised extract” | Marker, method and acceptance range | No testable release criterion |
3. Authenticity and dilution checks
Authenticity is best handled as a fingerprint comparison rather than a single number. Retain a reference sample from a qualified batch and compare subsequent lots by an appropriate chromatographic or spectroscopic fingerprint, together with ash, moisture and solubility data. Undeclared carriers such as maltodextrin, and the blending of cheaper humic materials, are the two recurring issues.
A supplier who can explain the collection region, the purification flow and the lot genealogy is far easier to qualify than one who can only supply a high fulvic acid number.
- Fingerprint: HPLC or FTIR comparison against a retained qualified reference sample.
- Ash values: total ash and acid-insoluble ash, with agreed limits.
- Carrier screen: starch/dextrin test and an explicit carrier declaration.
- Solubility and pH: useful process indicators for a purified powder.
4. Heavy metals and the release specification
Lead, cadmium, mercury and arsenic are the core panel. Because shilajit can concentrate minerals from its source geology, the limits should be written against the rules of the destination market and confirmed by ICP-MS on each released batch. A supplier COA that shows only a pass/fail statement is not enough for a first qualification.
Add pesticide residues, residual solvents from purification, microbiology and, where the market requires it, a screen for polycyclic aromatic hydrocarbons or other site-specific contaminants. Put every limit, method and reference into one signed specification so the COA can be checked line by line.
| Panel | Method | Documentation to require |
|---|---|---|
| Pb, Cd, Hg, As | ICP-MS | Individual results, limits, method reference, batch number |
| Total / acid-insoluble ash | Gravimetric | Limit consistent with the qualified reference batch |
| Residual solvents | GC (headspace) | Named solvents used in purification, with limits |
| Microbiology | Plate count and pathogen tests | TAMC, TYMC, E. coli, Salmonella |
5. Independent confirmation and change control
For a high-variability natural material, independent laboratory confirmation on the first batch and periodic verification afterwards is a reasonable, auditable position. It also gives your QA team a second data point if a later batch fails internally. Agree in advance which laboratory, which method and what happens if the two results disagree.
Change control should cover collection region, purification subcontractor, drying method, carrier and assay method. Any of those changes should trigger re-qualification before the next production order rather than a simple COA update.
- First-batch third-party confirmation of the marker and the heavy metal panel.
- Retained reference sample and a documented fingerprint comparison method.
- Written change-notification window in the supply agreement.
- Periodic verification schedule proportionate to shipment frequency.
6. Building the RFQ
A complete enquiry removes the ambiguity that makes shilajit quotations hard to compare. List the grade, the marker definition, the contaminant limits and the documentation set in one message, and ask each supplier to return a specification sheet in the same format. The request-a-quote form can carry the ingredient, target specification, quantity and destination market.
- Purified shilajit extract powder, with the fulvic acid method, basis and acceptance range stated.
- Source region, purification summary and carrier declaration.
- Heavy metals, ash, residual solvents and microbiology with market-specific limits.
- Batch-specific COA, independent lab report on the first batch, and a pre-shipment sample.
Frequently asked questions
Why do two suppliers quote very different fulvic acid percentages?
They are probably using different methods or reporting different fractions, such as a combined humic plus fulvic total. Ask for the method, the basis and whether humic substances are included before comparing numbers.
Is a supplier COA sufficient for shilajit?
Not for a first qualification. Independent laboratory confirmation of the marker and the heavy metal panel on the first batch, plus periodic verification, is a more defensible position for a mineral-rich natural material.
Which contaminants matter most?
Lead, cadmium, mercury and arsenic by ICP-MS are the core panel. Add pesticide residues, residual solvents from purification, microbiology and any site-specific contaminants required by the destination market.
How can I check that the powder has not been diluted?
Require a carrier declaration, then verify with a starch/dextrin screen, ash values, moisture, solubility and a fingerprint comparison against a retained qualified reference sample.
Need the documentation for your project?
Tell us the ingredient, target specification, quantity and destination market. Our team will send a specification sheet, COA sample and a quotation within 24 hours on working days.
Request a Quote Browse Products
Related topic: shilajit extract authenticity testing and contaminant limits

