Heavy Metals & Solvent Residues in Botanical Extracts: Setting Defensible Limits

Plants concentrate what is in the soil, and extraction can concentrate it further. For a botanical extract, heavy metals, pesticide residues, residual solvents, mycotoxins and microbiology should be treated as release criteria rather than optional extras. The commercial risk is a rejected container; the regulatory risk is a recall.

Key takeaways
  • Write the limit, the method and the regulatory basis into the specification.
  • Heavy metals: ICP-MS is the usual confirmatory technique.
  • Residual solvents: GC-MS/GC-FID against the solvents actually used in the process.
  • Require batch-specific numeric results, not “complies”.

Where contamination enters

  • Soil and water: lead, cadmium, arsenic, mercury; regional geology matters.
  • Cultivation: pesticide residues from spraying or drift.
  • Processing: residual ethanol, methanol or other extraction solvents; cross-contact on shared lines.
  • Drying and storage: microbial growth, mycotoxins, moisture uptake.

Frameworks commonly used by buyers

For EU food and supplement destinations, contaminant maximum levels are set under Regulation (EU) 2023/915 and pesticide residue limits under Regulation (EC) No 396/2005; novel-food status is assessed under Regulation (EU) 2015/2283. In the US, dietary supplement cGMP is under 21 CFR Part 111, importers work under FSMA FSVP, and state-level limits such as California Proposition 65 may apply. Cosmetic and feed applications add their own frameworks.

The important point is not to copy a generic number from another product. Applicable limits depend on the finished product, daily intake and the destination market. Ask your regulatory team to set product-specific limits, then require the supplier to test against them.

Analytical methods to ask for

PanelTypical methodWhat to check on the COA
Heavy metalsICP-MS (or ICP-OES)Pb / Cd / As / Hg individually, with units and limits
Pesticide residuesGC-MS/MS, LC-MS/MS multi-residueScope of the screen and any MRL exceedances
Residual solventsGC-MS / GC-FID headspaceSolvents actually used in the extraction process
MicrobiologyPlate count / enrichmentTPC, yeast & mould, E. coli, Salmonella, S. aureus
MycotoxinsLC-MS/MS or ELISA screenAflatoxins and ochratoxin A where relevant

How to review a COA in five minutes

  • Match the batch number on the COA to the packing label.
  • Check that every result is numeric, with units and a stated limit.
  • Check that the method is named and that the laboratory is identified.
  • Check the date against the production and retest dates.
  • Check that the specification revision matches the version you qualified.

If you need a documentation package for a specific market, describe the destination in your enquiry and our team will align the release specification accordingly.

Frequently asked questions

Is a “heavy metals: complies” statement acceptable?

For a formal release, no. Numeric results per element let you trend batches and demonstrate due diligence during an audit.

Do all botanical extracts need residual solvent testing?

If ethanol or another solvent is used in extraction, yes. Water-only extracts still benefit from a declaration that no organic solvent was used.

How often should we re-verify with an independent lab?

On first qualification and periodically afterwards; the frequency usually follows your supplier risk rating and the intake of the finished product.

Can a supplier simply test to our limits?

Usually yes, provided the limits are written into the agreed specification before production and the methods are available to the laboratory.

Need the documentation for your project?

Tell us the ingredient, target specification, quantity and destination market. Our team will send a specification sheet, COA sample and a quotation within 24 hours on working days.

Request a Quote Browse Products

Related topic: contaminant panels and batch COA templates

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top