Resveratrol from Polygonum cuspidatum (Japanese knotweed) should be specified as trans-resveratrol by HPLC, with a stated cis-isomer limit and a limit for emodin and related anthraquinones. The trans form is the traded active; light and heat can convert it to cis, and anthraquinones from the same root are an unwanted co-extract. Traded purities commonly range from 50% to 98%, but the number is only comparable when the method, column and standard are named.
- Specify trans-resveratrol, not an unqualified “resveratrol” total.
- Set a cis-isomer limit and protect the material from light during storage and transit.
- Require an emodin / total anthraquinone limit with a named method.
- Name the plant part, origin, extraction solvent and residual-solvent obligations.
1. What the purity percentage actually covers
High-purity resveratrol is usually quantified by HPLC against a trans-resveratrol reference standard. A “98%” claim should say whether it is trans-resveratrol only, total resveratrol including the cis isomer, or an area-normalisation result from a chromatogram. Those are three different numbers.
Lower grades (50% or 20%) are typically whole extracts with a substantial non-resveratrol fraction. Their physical behaviour, colour and solubility differ from a purified 98% material, so they should not be substituted into a formulation developed for the high-purity grade.
| Grade | Typical basis | Specification focus |
|---|---|---|
| 98% trans-resveratrol | Purified, HPLC assay | Isomer ratio, emodin, residual solvents, polymorph/particle size |
| 50% resveratrol | Standardised extract | Assay method, polydatin, anthraquinones, carrier |
| 20% or ratio-only | Whole root extract | Marker method and what the remainder of the mass is |
| Grape-skin resveratrol | Different raw material | Separate SKU; different impurity and allergen considerations |
2. Trans versus cis: a stability issue written into the spec
Resveratrol converts from the trans to the cis form under UV and visible light. Because most buyer specifications and finished-product claims are built on trans-resveratrol, an isomer limit belongs on the release specification and the packaging should be light-protective.
Ask how the sample was handled between production and testing, and store the retained reference sample in the same conditions as the bulk. A falling trans figure between the supplier COA and the incoming test is often a storage and transport problem rather than a manufacturing one.
- Trans-resveratrol assay by HPLC with a named standard and detection wavelength.
- Cis-resveratrol (or total isomer) limit as a separate line.
- Opaque, light-barrier inner packaging; avoid clear bags and prolonged bright exposure.
- Retest after extended storage or warm transit, not only at goods-in.
3. Emodin, anthraquinones and co-extracted compounds
Polygonum cuspidatum root contains anthraquinones such as emodin and physcion alongside stilbenes. Purification is what separates a clean high-purity resveratrol from a root extract that carries a meaningful anthraquinone load. Buyers commonly set a maximum for emodin, and some markets set a limit for total anthraquinones.
Polydatin (piceid), the glycoside form, is another compound worth naming: some processes convert it to resveratrol, others leave it in the finished material. Whether you specify it or not, a process change that affects it should trigger re-qualification.
| Compound | Why it is controlled | Evidence to request |
|---|---|---|
| Emodin | Anthraquinone co-extract from the same root | HPLC or LC-MS result with a stated limit |
| Total anthraquinones | Market-specific restriction | Method and result per batch |
| Polydatin (piceid) | Process-dependent glycoside residue | Result on the first batch and after process changes |
| Cis-resveratrol | Isomer formed by light exposure | Separate result or total isomer ratio |
4. Botanical identity, origin and solvent
State Polygonum cuspidatum Sieb. et Zucc. (syn. Reynoutria japonica), root, with country and region of origin and harvest window. Japanese knotweed is widely naturalised, so origin and collection practice affect both traceability and the impurity profile.
Ethanol/water extraction and subsequent purification are common. Name the solvents used so that residual-solvent testing can be written against the correct ICH Q3C class, and ask for a brief process summary that explains how the anthraquinone fraction is reduced.
- Latin binomial including the accepted synonym, plant part and identification method.
- Country/region, harvest window, cultivated or wild-collected.
- Extraction and purification solvents, with residual-solvent results.
- Batch-to-raw-material traceability and a versioned specification.
5. Contaminants, physical parameters and documentation
The standard release panel applies: heavy metals by ICP-MS, multi-residue pesticides, residual solvents and microbiology, each with limits and method references. For a high-purity crystalline powder, also set particle size, bulk density and appearance, because these affect blending and dissolution in the finished product.
Ask for a versioned specification, a batch-specific COA with a chromatogram, and change-control terms covering origin, solvent, purification and assay method. Those are the four changes most likely to move the impurity profile.
- Versioned specification with method references and acceptance ranges.
- Batch COA with chromatogram, isomer ratio and emodin result.
- Light-protective packaging and a defined retest position.
- Written change notification before any process or origin change.
6. A complete enquiry
Put the grade, the isomer definition, the impurity limits and the documentation set in one RFQ. That is enough to make quotations comparable across suppliers and to give your incoming laboratory a reproducible target. Send the target specification with quantity and destination through the quote request form.
- Trans-resveratrol purity by HPLC with method, standard and detection wavelength.
- Cis-isomer limit and emodin / total anthraquinone limit.
- Plant part, origin, solvent, carrier and physical parameters.
- Contaminant limits, batch COA, light-protective packaging and a pre-shipment sample.
Frequently asked questions
What is the difference between 98% and 50% resveratrol?
The 98% grade is a purified material quantified by HPLC, while a 50% grade is a standardised whole extract with a large non-resveratrol fraction. They differ in colour, solubility, impurity profile and how they behave in a formulation.
Why does a cis-resveratrol limit matter?
The trans form converts to cis under light and heat. Most specifications are built on trans-resveratrol, so a cis limit plus light-protective packaging keeps the supplier COA and the incoming test aligned.
Is emodin always tested?
It should be, because emodin and related anthraquinones are co-extracted from the same root. Set a limit with a named HPLC or LC-MS method, especially for high-purity grades going into markets with anthraquinone restrictions.
Can grape-skin resveratrol be substituted for Polygonum cuspidatum material?
Not without re-qualification. It is a different raw material with a different impurity and allergen profile, and should be treated as a separate SKU with its own specification.
Need the documentation for your project?
Tell us the ingredient, target specification, quantity and destination market. Our team will send a specification sheet, COA sample and a quotation within 24 hours on working days.
Request a Quote Browse Products
Related topic: Polygonum cuspidatum resveratrol purity and emodin limits

