Gelatinised maca and raw maca powder are different materials, and an extract ratio does not describe either of them. Gelatinisation is a heat-and-pressure process that breaks down starch to make the powder more concentrated and easier to digest; maca extract is a further processed ingredient usually sold on a ratio plus macamide or other marker content. Specify the process, the colour grade, the starch or carbohydrate level and the marker method before comparing quotations.
- State raw, gelatinised or extract as three separate grades on the RFQ.
- A ratio such as 10:1 is process information; add a marker or starch figure to make it testable.
- Macamides and macaenes are the more characteristic markers, but the method must be named.
- Record colour grade and origin, because both affect price and batch consistency.
1. Three grades that are often quoted as one
Maca (Lepidium meyenii) reaches the market as raw root powder, gelatinised powder and concentrated extract. Raw powder retains its native starch; gelatinised powder has been processed to reduce that starch; extract is a concentrated, usually spray-dried material that may carry a carrier. Their bulk density, solubility, carbohydrate profile and price are all different.
A quotation that says only “maca powder 10:1” leaves the buyer unable to tell which of these is being offered. Put the grade in the first line of the specification.
| Grade | Process | Specification fields that matter |
|---|---|---|
| Raw root powder | Dried, milled root | Colour grade, mesh, starch, moisture, microbiology |
| Gelatinised powder | Heat/pressure treatment to break down starch | Residual starch, bulk density, solubility, colour |
| Extract (e.g. 10:1) | Extraction, concentration, drying | Marker or carbohydrate figure, carrier, residual solvents |
2. Gelatinisation: ask for evidence, not a claim
Gelatinisation is a process claim that should be verifiable. Practical indicators include a reduced starch or total carbohydrate figure, a change in bulk density and solubility, and a description of the heat/pressure step. Without at least one measurable field, two suppliers can use the word for quite different material.
Because the treatment involves heat, also ask whether anything is added during processing and whether the finished powder is dried to a controlled moisture. This is where an undeclared carrier or a starch-based bulking agent can quietly appear.
- Residual starch or total carbohydrate with a stated method.
- Description of the gelatinisation step and any processing aids.
- Loss on drying, bulk density and cold-water solubility.
- Carrier declaration, or an explicit “no carrier” statement.
3. Macamides, macaenes and other markers
Macamides and macaenes are lipophilic compounds frequently used as characteristic markers for maca. They are typically measured by HPLC or LC-MS, and the reported figure depends heavily on the extraction and the set of compounds included in the sum. Other commonly specified groups include glucosinolates, amino acids and total polysaccharides.
Choose the marker that fits the finished product and the analytical capability of your incoming laboratory, then hold it constant. Switching from a macamide panel to a polysaccharide figure mid-programme makes historical batches incomparable.
| Marker | Method | Buyer consideration |
|---|---|---|
| Macamides / macaenes | HPLC or LC-MS | More characteristic; define which compounds are summed |
| Glucosinolates | HPLC | Sensitive to cultivar, drying and heat treatment |
| Amino acids / protein | Amino acid analyser or Kjeldahl | Useful for a general nutritional specification |
| Total polysaccharides | UV-Vis colorimetric | Method-dependent; needs a named standard |
4. Colour grades and origin
Yellow, red and black maca are traded as distinct colour grades with different pricing and, in some markets, different positioning. Colour should be described in words and, where practical, tied to a retained reference sample or a simple colour measurement, because photographs and lighting are unreliable evidence.
Origin matters in the same way it does for other Hunan and imported botanicals: growing region, harvest season and drying conditions all move the composition. Ask for country and region, harvest window and the identification method used at goods-in.
- Colour grade (yellow, red, black or blend) with a retained reference standard.
- Lepidium meyenii Walp., root, with botanical identification.
- Country, region, harvest window and cultivated status.
- Documented link from finished batch to incoming raw-material lot.
5. Contaminants, microbiology and drying
Root powders and extracts are exposed to soil and to drying environments, so heavy metals by ICP-MS, a multi-residue pesticide screen and microbiology should be written as a release panel with limits and methods. Moisture control is particularly important for a starch-rich material.
Where an extract is produced with ethanol or another solvent, add residual-solvent testing against the applicable ICH Q3C class. For raw and gelatinised powders, confirm that no solvent-based extraction step is being used.
- Pb, Cd, Hg, As by ICP-MS with individual results and limits.
- Multi-residue pesticide screen against the destination-market list.
- TAMC, TYMC, E. coli, Salmonella and S. aureus.
- Loss on drying, water activity where the programme sets a stability target.
6. A comparable RFQ
When the grade, marker and method are fixed in the enquiry, quotations become comparable and the first production batch is far less likely to fail incoming QA. Send the same template to every supplier and keep the returned specification sheets as the qualification record.
- Grade (raw / gelatinised / extract), colour grade and plant part.
- Ratio as process information plus a measurable marker or carbohydrate figure.
- Carrier, solvent, physical parameters and packaging.
- Contaminant limits for the destination market, batch COA and pre-shipment sample.
Frequently asked questions
Is gelatinised maca the same as a maca extract?
No. Gelatinisation is a heat-and-pressure treatment of the root powder that reduces starch; an extract is a concentrated material produced by extraction and drying. They have different composition, density and pricing.
Does a 10:1 ratio tell me how much macamide is present?
No. A ratio describes how much raw material was concentrated into the finished extract. Macamide content depends on the raw material, solvent and process and must be measured separately.
How can I verify a gelatinisation claim?
Ask for a residual starch or total carbohydrate figure with a method, plus bulk density, solubility and a description of the heat/pressure step. A claim with no measurable field is not verifiable.
Which contaminant panel should I require?
Heavy metals by ICP-MS, a multi-residue pesticide screen, microbiology and, for solvent-extracted grades, residual solvents against the applicable ICH Q3C class, each with stated limits and method references.
Need the documentation for your project?
Tell us the ingredient, target specification, quantity and destination market. Our team will send a specification sheet, COA sample and a quotation within 24 hours on working days.
Request a Quote Browse Products
Related topic: maca extract grades, gelatinisation and macamide specifications

